The front lower control arm and rear position bracket to be removed from the car.
Remove the OEM bush from the bracket and clean the housing of all dirt. NB Take note of the forward face of the bracket before removing the OEM bush.
Make sure the control arm and the bracket are in the same orientation before fitting the PSB bushing. NB The square red flange (PSB 1302 outer) and the larger face of the black bushing (PSB 1302 inner) should face the arm after fitting.
Use lubricant on the outer of the red bushing before pressing the bushing into the bracket. Apply lubricant to the outer of the black bushing. NB The red square flange should be oriented to the shape of the bracket.
Refit the bracket and control arm to the car.
Contact