Mechanical Lock Metal Sleeve
Remove worn OE bushing by pressing it out.
Ensure outer metal casing of original rubber bushing is removed, which can be done by cutting with a hacksaw and knocking out with a chisel.
Clean housing with sandpaper to remove sharp edges, so as not to damage new bushing.
Lubricate inside of new poly bushing with silicone lubricant.
Lubricate the outer edge/flange ONLY of bushing going into the housing.
Press new bushing into the arm, ensure the most tapered Flange faces the arm when pressing in the new poly bushing. This can be done using a bench vice or mechanical press.
Once the bushing is inserted tap the metal sleeve into the bushing, using a rubber mallet.
The new bushing installation is now complete.
Spring Style Bushing
Remove original bushing by pressing out or using a blow torch.
Clean housing with sandpaper to remove sharp edges, so as not to damage new bushing.
Remove metal sleeve from new poly bushing.
Lubricate inside of the new poly bushing with silicone lubricant, and the outer edge ONLY of bushing going into the housing.
Press two bushing halves into housing (rubber hammer or by hand).
Insert metal sleeve into bushings.
The installation is complete.