Take out the original sub frame bushes.
Take out any dirt or rust and then supply lubricant in the housing to receive the new polyurethane bushes.
Fit the thicker half bushing with silver coloured metal ring to the top of the housing.
Fit the thinner half bushing with a dark metal ring into the bottom of the housing.
Put lubricant onto the metal sleeve. Ensure the flat end of the metal sleeve is at the bottom and the receiving machined end faces the top to receive the locating spigot.
The bushing is now correctly fitted into the housing. Place the original locating washers at the top and bottom of the bushing, ready to receive the locating spigot.
Tighten all original hardware to manufacturer’s specifications.
The installation is complete.