Remove original sub-frame bushing by pressing out using a press or hammer.
Ensure outer metal casing of original rubber bushing IS removed, which can be done by cutting with a hacksaw and knocking out with a chisel.
Clean housing with sandpaper to remove sharp edges, so as not to damage new bushing.
Remove metal sleeve from new poly bushing. Lubricate inside of the new poly bushing with silicone lubricant and the outer edge/flange only of bushing going into the housing.
Press 762 (a) from the top of the sub-frame using a rubber hammer and ensure the lip locates securely to the sub-frame.
Press 762 (b) from the bottom side of the sub-frame using a rubber hammer and ensure the lip locates securely to the sub-frame.
Insert metal sleeve into bushings, all the way flush on the bottom side of the bushing.
The installation is complete.